System information

122 Logical Partitions on System i5
21.The Guided Setup Wizard - Configure eth1 panel is now shown (Figure 4-21 on
page 122). This time we select the Open network radio button and click Next to continue.
Figure 4-21 Guided Setup - Configure eth1 open network
22.The Guided Setup Wizard - Configure eth1 panel is now shown (Figure 4-22). You can
configure the eth1 interface to use a fixed IP address or obtain one automatically from
your open network DHCP server.
Figure 4-22 Guided Setup - Configure eth1 IP address
In our example, we select the Yes radio button to allow the eth1 interface to automatically
obtain an IP address from our open network DHCP server. Click Next to continue with the
wizard.
23.The Guide Setup Wizard - Configure eth1 panel is now shown (Figure 4-23). We can
specify that the eth1 LAN adapter act as a gateway device to our open network. Enter your
gateway IP address in the Gateway address field. If you don’t know your gateway address,
then you should contact your network administrator.