System information

114 Logical Partitions on System i5
10.This completes the first part of the Guide Setup wizard. The Guided Setup - The Next
Steps panel is displayed (see Figure 4-10).
Figure 4-10 Guided Setup wizard - The next steps
The next section will configure the HMC network settings. You will need to have planned
your network environment for HMC before continuing with these next tasks. You should
use the values entered in the HMC Guided Setup wizard checklist.
Click Next to continue with the Guided Setup wizard.
11.The Guided Setup Wizard - Configure Network Settings panel appears as shown in
Figure 4-11. In our example we show how to configure the HMC for both a private network
and an open network. We use the first ethernet network card (eth0) in the HMC for the
private network configuration, and the second ethernet card (eth1) to connect to our open
network.
Enter a host name for your HMC, as well as your domain name and a description for the
HMC.
Figure 4-11 Guided Setup wizard - Configure network settings
Note that the ethernet ports are called eth0 and eth1, but the HMC ports are labeled
HMC 1 and HMC 2.
Click Next to continue with the Guided Setup wizard.