User Manual

YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!

 Clock time adopts 24-hour mode.

 The interval between two operations cannot exceeds 5s. Otherwise, remote controller will quit setting status.

Operation for TIMER ON/TIMER OFF is the same.

TIMER ON / TIMER OFF button

TIMER ON button

 "TIMER ON" button can set the time for timer on. After pressing Timer On button, the " " icon disappears and

the word "ON" on remote controller blinks. Press " " or " " button to adjust TIMER ON setting. After each

pressing " " or " " button, TIMER ON setting will increase or decrease 1min. Hold " " or " " button, 2s later,

the time will change quickly until reaching your required time. Press "TIMER ON" to confirm it. The word "ON" will

stop blinking. The " " icon resumes displaying.

 Cancel TIMER ON: Under the condition that TIMER ON is started up, press "TIMER ON" button to cancel it.

TIMER OFF button

 "TIMER OFF" button can set the time for timer off. After pressing the Timer Off button, the " " icon disappears

and the word "OFF" on remote controller blinks. Press " " or " " button to adjust TIMER OFF setting. After each

pressing " " or " " button, TIMER OFF setting will increase or decrease 1 min. Hold " " or " " button, 2s later,

the time will change quickly until reaching your required time. Press "TIMER OFF" word "OFF" will stop blinking.

The " " icon resumes displaying.

 Cancel TIMER OFF. Under the condition that TIMER OFF is started up, press "TIMER OFF" button to cancel it.

 Under on and off status, you can set TIMER OFF or TIMER ON simultaneously.

 Before setting TIMER ON or TIMER OFF, please adjust the clock time.

 After starting up TIMER ON or TIMER OFF, set the constant circulating valid. After that, air conditioner will be

turned on or turned off according to setting time. The ON/OFF button has no effect on setting. If you don’t need

this function, please use remote controller to cancel it.

Under cooling mode, press "TEMP" and "CLOCK" buttons simultaneously to start up or turn off energy-saving function.

When energy-saving function is started up, "SE" will be displayed on the remote controller, and air conditioner will adjust

the set temperature automatically according to factory settings to reach to the best energy-saving effect. Press "TEMP"

and "CLOCK" buttons simultaneously again to exit energy-saving function.

 Under energy-saving function, fan speed is defaulted to auto speed and it cannot be adjusted.

 Under energy-saving function, set temperature cannot be adjusted. Press "TURBO" button and the remote

controller won’t send signal.

 Sleep function and energy-saving function can’t operate at the same time. If energy-saving function has been set

under cooling mode, press sleep button will cancel energy-saving function. If sleep function has been set under

cooling mode, start up the energy-saving function will cancel sleep function.

℃

Under heating mode, press "TEMP" and "CLOCK" buttons simultaneously to start up or turn off 8℃heating function.

When this function is started up, " " and "8℃ "will be shown on remote controller, and the air conditioner keep the

heating status at 8℃.Press "TEMP" and "CLOCK" buttons simultaneously again to exit 8℃heating function.

 Under 8℃ heating function, fan speed is defaulted to auto speed and it cannott be adjusted.