Unit installation

P17 OF 34
MAINTENANCE
P18 OF 34
OPERATING GUIDE
YMGI, A COMFORT MAKER, A JOY COMPANION, A SATISFACTION GUARANTOR... YMGI, A COMFORT MAKER, A JOY COMPANION, A SATISFACTION GUARANTOR...
3.3 AT THE START OF THE SEASON 3.4 DURING THE OFF SEASON
* Check that nothing blocks the air inlet and outlet of
the indoor and outdoor units.
* Running the unit without air filters can cause
malfunctions due to dirt or dust. Always install air
filters at all times.
* Check that drainage hose is not bent or clogged.
* Check that the units are properly installed.
* Cut off the power supply main switch.
* Clean the enclosure.
* Leave the fan running for 2-3 hours to dry out the
inside of the unit.
* Do not use benzine gasoline, thinners or polishing
products for cleaning.
O
* Do not wash with hot water(above 104 F ),Some
parts of the unit may be deformed.
* To distribute cool air throughout the room, adjust air
flow directions shown by the arrows (see picture)to
diffuse cool air.