Specifications

Environmentally
Friendly Inside & Out
Standard Washable Filter and
Advanced Filters
All systems come with standard washable filter.
YMGi also oers optional advanced filters to remove
biological contaminants like viruses, bacteria, molds
and allergy causing agents that threaten your health.
These include a cold-catalyst filter, active enzyme
filter, electric static filter and more to come.
Refrigerant R410A
All SOLO and CHOIR systems use R-410A refrigerant,
which is Hydrofluorocarbon (HFC) with ODP (Ozone
Depletion Potential) and eco-friendly.
RoHS Approved Materials
RoHS restricts the use of certain dangerous
substances commonly used in electronic and
electronic equipment.
Nitrogen-Protected Brazing
This assures reduced oxidation of joined metal parts
and a longer overall life.
Volatile Liquid Coil Cleaning
All the component surfaces and joints and corners
are cleaned with volatile cleaning agents, to ensure a
safe clean equipment and environment.
Leakage Checked Refrigerant System
All the refrigerant pipes, joints and refrigerant-related
components are checked for leakage in the assembly
line, to ensure each and every product is safe and
environment friendly.
Air Flow -
Silent Comfort
Quiet Operation
Computer-aid designed, optimized wind tunnel,
a mesh-net combed intake air pattern, cross-flow
fan wheel, sound absorbing insulation, vibration
absorbing rubber grommets, lubricated motor
bearings, and molded fan motor all contribute to the
silent operation of the YMGi systems.
Wide-Angle Air Spread and
Long Air-throw
Multi-dimensional airflow of short to long air-throw
and multiple indoor fan motor speeds, help air to
reach every corner of the room.
Independent Dehumidification
Prioritizes the reduction of humidity levels vs.
temperature in the room. Traps the humidity in the
indoor air and exacts the moisture out providing
drier, more comfortable environment.
Random Pitch Cross-Flow Fan Wheel
Limits and osets high-pitch sound and low
frequency sound which are normally generated
during fan wheel rotating operation, to provide
whisper quiet operation.
Quality & More
Stylish Looks
YMGi units come with a clean, modern styling to
complement any décor.
Thoroughly Tested Before Packaging
All YMGi systems are tested one by one and are
packaged only after all safety, operational functions,
features and cosmetic details have been checked.
All products must meet, or exceed, our strict tested
standards of quality control.
Reliable Quality
It’s simple. All YMGi products are designed using the
latest technology and with the end user always in
mind. YMGi uses only high quality parts, including a
rust-free cabinet built to last a lifetime. Best of all,
every YMGi system is backed by our 100% customer
satisfaction guarantee.
Easy Installation
Units install quickly and easily, with no need for major
construction or any ductwork. It takes technicians
only one-third to one-half of the time to install mini
split system, as it takes to install a conventional
central system of same capacity.
UNIQUE
FEATURES
98
both Smart & Safe
Comfort &
Convenience
Auto Mode
By intelligently sensing and comparing the set
temperature to the actual room temperature, this
feature switches between heating and cooling
modes automatically. By following room temperature
changes, it will deliver the exact amount of warm or
cool air needed to ensure maximum comfort.
Fast Turbo Heating and Cooling
This function boosts cooling or heating capacities, as
quickly as possible, and makes rooms as comfortable
as possible.
Air Swing
With the motorized louver’s help, the louver can
swing continuously back and forth between upper
and lower position limits, or left and right (optional),
as to direct air to every corner in the room to reach
maximum comfort and even temperature spectrum
inside. Or, the louver motor can stop at some point
so that the louver can be fixed at some angle to your
wishes. All these are controlled with a finger touch at
the remote control.
Hot Start-Up (Anti-Cold Air Blowing)
When the heating operation starts up or whenever
the system goes from cooling to heating, the indoor
fan motor won’t rotate at the very beginning, to
avoid cold air being released into the room. When
the indoor unit coil/pipes are heated up and get hot
enough, and the fan starts up and releases warm air
into the room.
Sleep Mode
Automatically adjust the room set temperature to
adapt to the lower cooling/heating load needs during
the sleep period. With the Sleep Mode on, it will
adjust the room set temperature to slowly rise when
cooling or fall when heating, over the sleep mode,
before the unit stops. Besides saving energy, it allows
comfortable sleep by preventing a sudden change in
the room temperature.
24-Hour On/O Timer
Allows for cooling or heating to be set to start or
stop at any time within
Memory and Auto Restart
By automatically memorizing the operation mode,
airflow, temperature and other settings, should power
ever be cut o or lost to the unit, it will automatically
return to the same settings, after power is restored.
Self-Diagnosing
Should a problem ever develop, the unit will display
an error code on the LCD display of indoor unit
and/or LED lights on outdoor control boards. With
dierent lit patterns, the corresponding problem
can be addressed within a very narrow area, to help
technician with a fast diagnosis and much easier
trouble-shooting.
Digital Display On/O
An easy to read LCD display indicates the operational
status and functions, and even error codes of the
unit. The display can be turned o, whenever you
want, by pressing the “LIGHT” button on the lower
right-hand corner of the remote control. This feature
is literally a dream come true, because it allows the
room to remain dark at night without the annoyance
of the lights. If you wake up during the night, you
can also turn the digital display on by pressing the
same button and use the display as a night-light and
avoid waking your sleeping partner by turning on the
regular room lights System Safety Protections
System Safety
Protections
• High Pressure
• Compressor High Temperature
• Outdoor Coil Temperature
• Outdoor Ambient Temperature
• Indoor Coil Temperature
• Built-in Over-Current Fuse at IDU
• Optional De-Ice Heater in ODU Pan
• More to Come