Unit installation

CONTENTS
P1 OF 38
12
11
16
26
27
5
6
29
4
23
24
12
27
28
2
All Units Shall Be Installed by Experienced or Licensed Contractor Or
Technician. Read Manuals before Installation.
Manufacturer Shall NOT Take Any Responsibilities for Any Damage or
Loss Due to Improper Installation or Operation or Natural Disaster.
Connect All Wiring Securely. Loose Wire or Other Bad Contact May Cause
Arc or Overheating and Fire Hazard.
Following NEC, State and Local Codes and Installation Instructions of All
Units, Otherwise Unit Warranty Will Be Void and Serious Damage To People Or Property May Be
Caused.
Don't Supply Power until All Wiring and Tubing and Checking is
Completed. Ground the Unit Following Instructions and NEC, State and Local Codes.
25
30
End User Technician Contact of Technical Support-Manufacturer
Toll Free Number: 1-866-833-3138 x 703
Email: [e-mail]
(End user needs to contact installation or service technician to check the unit, before the
technicians contact manufacturer technical support-straight technical communication)
34
35
36
37
38
YMGI, A COMFORT MAKER, A JOY COMPANION, A SATISFACTION GUARANTOR...
P2 OF 38
ILLUSTRATION OF INSTALLED SYSTEM SAMPLE
YMGI, A COMFORT MAKER, A JOY COMPANION, A SATISFACTION GUARANTOR...
Notes: Actual unit/ part looking and installation may vary from the illustrated.
Subject to continuous improvement and change without prior notice.
Air out
Drainage hose
Connection pipe
Disconnect Box
To correctly sized
HVAC CIRCUIT
BREAKER
Indoor unit
Outdoor unit
Display icon (May vary open models):
Air wall sleeve
Guide panel
Filter
Bolt
Nut
Wrench
ILLUSTRATION OF INSTALLED SYSTEM SAMPLE
CONNECTION OF WIRES
GET READY FOR INSTALLATION
ATTENTIONS-MUST READ AND FOLLOW THE FOLLOWING, PRIOR TO CONNECTING REFRIGERANT LINES
NOTES FOR REFRIGERANT RELATED HVAC PRODUCTS, SPECIFICALLY THE SPLIT TYPE
IMPORTANT NOTES
BRIEF INTRODUCTION TO MINI SPLIT WALL MOUNT SYSTEM
IMPORTANT NOTES FOR UNIT OPERATION ABMIENT & SIZING
UNIT ENGINEERING SUBMITTALS-MECHANIAL
INSTALLATION CLEARANCE REQUIREMENTS GENERAL
INSTALLATION POSITIONS FOR INDOOR UNIT
INTRODUCTION
INSTALLATION POSITIONS FOR OUTDOOR UNIT
DURING INSTALLATION-INDOOR UNIT
INSTALLATION-OUTDOOR UNIT
WIRING OUTDOOR UNIT
CONNECT REFRIGERANT PIPES BETWEEN INDOOR AND OUTDOOR UNITS
PIPING GUIDE
INSTALLATION ACCESSORIES
DURING INSTALLATION
SYSTEM INSPECTION AND TRIAL RUNNING
CHECK AFTER INSTALLATION AND TEST OPERATION
INSTALLATION AND MAINTENANCE OF HEALTHY FILTER
TROUBLESHOOTING
USER NOTES AND SERVICE LOG
LIMITED PRODUCT WARRANTY REGISTRATION CARD
WARRANTY AND TECH. SUPPORT
USER NOTES AND SERVICE LOG
MEMO
22
19
18
17
15
8
3