Unit installation

P35 OF 38
LIMITED PRODUCT WARRANTY REGISTRATION CARD
YMGI, A COMFORT MAKER, A JOY COMPANION, A SATISFACTION GUARANTOR...
P36 OF 38
WARRANTY AND TECH. SUPPORT
YMGI, A COMFORT MAKER, A JOY COMPANION, A SATISFACTION GUARANTOR...
LIMITED PRODUCT WARRANTY
REGISTRATION CARD
Product-Indoor Unit Model No.:
Product-Indoor Unit Serial No:
Installed at Address:
Purchased from Distributor Company/Branch Office Located at:
Indoor Unit
Installed by Licensed HVAC Contractor Company/Branch Office Located at:
Street name and number, City, State, Zip code, Phone No. Fax No.
Currently Valid HVAC License No of Installation Technician:
Full Name of Installer Technician:
YMGI Packing List No:
Licensed Installing HVAC Contractor/Technician Checklist:
• Are you a currently licensed HAVC contractor/technician?
• Did you read through the manual(s) prior to installation?
• Is unit unpacked and checked by the installer for obvious damage?
• Supply power V/Ph/Hz measured at circuit breaker to the outdoor unit: or Indoor unit:
• Incoming power V/Ph/Hz measured at terminal blocks of outdoor unit: or Indoor unit:
• Wire gauge and qty. between circuit breaker/disconnect switch to outdoor unit:
• Wire gauge and qty. between outdoor unit and indoor unit:
• What are installed before HVAC Licensed Technician took over?
• Is field wiring checked following national and local codes?
• Selected the correct electrical components (HVAC circuit breaker or fuse or disconnect switch for the power to the outdoor unit,
connecting wires between circuit breaker/disconnect switch and outdoor unit, wires between outdoor and indoor units)?
• Is indoor coil and/or outdoor coil sealing checked and passed prior to installation?
• Is refrigerant piping length within stated ranges and free from kinks or too much bending?
• Indoor unit away from ceiling and outdoor unit away from the wall, bushes and other obstacles enough and safe clear distance,
required in the manuals?
• Do air intake and discharge grills have enough open area free from any blocking?
• Indoor unit is installed on secured bracket, outdoor unit is placed on level platform, pad, or bracket securely?
• Taped the inter-connecting pipe ends before running through structures, keep from getting dust or other dirties into the pipes to
damage the refrigeration system and void your factory warranty and cost you much more money?
• Is condensate drain pan or pipe checked all right free of any leakage?
• Vacuumed the connecting pipes for leakage check, before back-seating the stopping valves at outdoor condensing unit?
• Refrigerant suction pressures PSI: discharge pressures PSI: Outdoor Temperature F
• Are both indoor fan wheels and outdoor unit fan blades checked for smooth rotation free of abnormal noise?
• Is outdoor unit compressor observed being started, running and stopped in right ways?
• Are all system/unit functions tested and checked to be surely all right, before you fill this card?
• Is system/unit tested to run for at least 30 minutes?
• Did you explain or teach owner(s) or end user(s) clearly the right operation or normal maintenance of the system/unit?
• Does your company provide and will follow installation/service warranty policy?
To Validate the Warranty, Need to Mail the Fully Filled and Signed Card to Warranty Dept.,
YMGI Group, POB 1559, O’Fallon, MO 63366 within 7 Calendar Days after Original Installation,
or New Home (Unit is Not Used Yet) is Closed, Whichever Comes Later.
Print Name of Licensed HVAC Installer:
Signature of Licensed HVAC Installer:
Date: Date:
Print Name of Unit Owner/User:
Signature of Unit Owner/User:
Date:
Outdoor Unit Model No.:
Outdoor Unit Serial No.:
Installed on Date (mm/dd/yyyy):
Purchasing Order No:
Outdoor Unit
Packaged Unit (Please Check Whatever Applicable)
Office Ph.:
Cell Ph.:
Street name and number, City, State, Zip code, Phone No. Fax No.
Street name and number, City, State, Zip code, Phone No. Fax No.
YMGI warrants to the purchaser/owner(s) that YMGI products be free from defects in material and
workmanship under the normal use and maintenance, with the standard Limited Product Warranty
Policies that comes with the unit or sales package.
YMGI IS NOT RESPONSIBLE FOR
CONTACT FOR FIELD SERVICE OR REPAIR
The following people, in a prioritized sequence, will take care of your request or issue:
1) The original installer; otherwise,
2) Your current service contractor; otherwise,
3) Authorized contractor in YMGI list that is close to you; otherwise,
4) Authorized Distributor in YMGI Distributor list; otherwise,
5) Contractor/Distributor you prefer who is close to you.
CONTACT FOR GENERAL TECHNICAL QUESTIONS OR SUPPORT, IN
A SEQUENCE:
1) The original installer; otherwise,
2) The current service contractor; otherwise,
3) The distributor; where the unit is purchased from otherwise,
4) YMGI Technical Support:
Tel: [phone]*703
Email: [e-mail]
* Regular equipment maintenance or field service or field inspection.
* Damage or repairs required as a consequence Customer do-it-yoursely(DIY) installation and/or any other faulty
installation or improper application.
* Failure to start due to voltage conditions, blown fuses, open circuit breakers, or other damages due to the
inadequacy or interruption of electrical service.
* Damage or repairs needed as a consequence of any misapplication, abuse, improper servicing, unauthorized
alteration, or improper operation.
* Damage as a result of floods, winds, fires, lightening, accidents, corrosive atmosphere, or other conditions
beyond the control of YMGI.
* Parts not supplied or designated by YMGI.
* Products installed outside USA or Canada.
* Any damages to person or property of whatever kind, direct or indirect, special or consequential, whether
resulting from use or loss of use of the product.
The original licensed installer or current service contractor should be contacted first of all, since they installed the
unit and/or know more details than anybody else.
They will check the unit and find out the problems with the professional knowledge about HVAC and electric
product installation by using special tools or instrument.
They can contact YMGI technical support for technical help during unit installation or inspection.
Product model and serial numbers needed, which can be found on unit nameplate sticker, so that our technician
can quickly identify the unit, parts and wiring diagrams, among our many products and models.