Specifications

TECHNOLOGY
the PV solar panel and turned into DC voltage and
current. This DC power can then be used to oset
what is needed to drive the DC inverter system. If the
generated and transferred DC power from the solar
panel is less than what is needed to drive the whole
system, AC power will fill the gap automatically. If
the power provided by the panel is enough to drive
the whole DC inverter system, then the AC power is
not requested or needed. The result is free cooling
and heating.
An O-Grid System
The energy savings of the SOLAR (56) series comes
from the reduced (sometimes down to zero, during
peak periods) electrical power consumption from the
utility company. This is an O-Grid system.
The SOLAR (56) system consists of one indoor
unit, one outdoor unit and one photovoltaic (PV)
type solar panel. It is the perfect solution to heat
and cool smaller single zone spaces like sunrooms,
nurseries, apartments, condos, oces and
mobile homes.
It uses a PV-type solar panel, which generates DC
current that can be used to replace or augment
the use of standard AC current. One or more PV
solar panels can be installed in a series, as long as
the recommended voltage/current specification
requirements are followed.
Here’s How It Works
When the SOLAR (56) DC inverter unit is called on
to provide either cooling or heating and there is
sunlight, the solar energy can be absorbed by
32
Here’s How It Works
When the SOLAR (79) DC inverter unit is called on
to provide either cooling or heating and there is
sunlight available, the solar energy can be absorbed
by the PH solar panel into thermal energy. This DC
power can then be used to oset what is needed to
drive the DC inverter and compressor.
Thermal Boost is the Key
The SOLAR (79) saves more energy, beyond that realized
by the standard DC inverter technology. By tapping into
the thermal boost provided by the (79)’s PH-type solar
panel, the compressor doesn’t need to work as hard as it
would if there were no solar panel.
The SOLAR (79) system consists of one indoor unit,
one outdoor unit and one photo thermal (PH) type solar
panel. It is the perfect solution to heat and cool smaller
single zone spaces like sunrooms, nurseries, apartments,
condos, oces and mobile homes.
It uses a flat-plate PH collector, which increases the
energy eciency of the system by heating the refrigerant
gas within the system, thereby reducing the overall
electrical energy required to drive the system.
SOLAR (56) DC INVERTER MINI SPLIT
SYSTEM - PV Type
SOLAR (79) DC INVERTER MINI SPLIT
SYSTEM - PH Type