User Guide 使用手册 E N G L I S H
IMPORTANT SAFEGUARDS E N G L I S H Warnings: 1. Read all of these instructions Save these instructions for later use, please. 2. Unplug this monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 3. Do not use attachments not recommended by the monitor manufacturer as they may cause hazards. 4. Do not use this monitor near water.
grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. 9. Do not allow anything to rest on the power cord. Do not locate this monitor where the cord will be abused by persons working on it. 10. Follow all warnings and instructions marked on the monitor. 11.
16 .When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards. 17. Upon completion of any service or repairs to this monitor, ask the service technician to perform routine safety checks to determine that the monitor is in safe operating condition. 18.
Contents 1. INTRODUCTION ............................................................................ 6 1.1 PACKING LIST..................................................................................6 1.2 QUICK SETUP ....................................................................................7 2. OPERATION GUIDE......................................................................10 2.1 ADJUSTING SETTING DISPLAY FREQUENCY AND RESOLUTION.............................................................
1. Introduction 1.1 Packing List After unpacking, make sure that all of the following parts are included. 1. 19” LCD monitor 2. User’s guide 3. Tablet CD 4. Power adapter 5. Power cord 6. Tablet pen module 7. Pen holder If there is a defect or missing part,contact the agency where you purchased the product.
1.2 Quick Setup 1.2.1 External controls Figure Designation LED indicator POWER MENU Function When the monitor is working, the indicator turns blue. When the monitor is in saving mode, the indicator turns red. Turns power on or off. Activate OSD menu, or confirm the adjustment. When the OSD menu is inactive, press button, will auto adjust UP / AUTO display mode to its utmost performance according to VGA setting; when the OSD is activated, this key function is up/right/increase adjustment.
Plug the VGA cable & USB cable into your computer VGA & USB port. ④ ② ③ Figure 1 ① ③DC input port: Plug the adapter port to DC input port, ④Pen holder slot: Insert the pen holder to the slot. Secure pen in holder when not in use.
1.2.3 Adjusting the Base Your LCD Monitor is designed to allow you to adjust it to an optimal viewing angle. Figure 2 CAUTION: Make sure the angle of the monitor is at least 10 degrees from the vertical; otherwise the monitor will be unstable and could fall over.
2. Operation Guide 2.1 Adjusting Display Frequency and Resolution The monitor’s true (physical) resolution is 1440 x 900,be sure to set the monitor refresh rate to 60 Hz if displaying the monitor at WXGA resolution (1440×900). 2.2 Working with the Tablet Pen This is an energy saving stylus pen. Stylus pen will be turnoff automatically when not in use. Stylus pen will activate automatically by tap the stylus on the screen. Figure 4 2.2.
* You do not need to touch the tablet surface to move the screen cursor and the pen tip needs to be within 5 mm of the pen display screen. * Hold your stylus pen the way you would hold a normal pen or pencil while writing on paper and the allowed pen input angle is 45° in any direction from a position. 2.2.2 Using the Pen Side Buttons The stylus pen have two side buttons and the default button settings as follows.
2.3 OSD Function Press button to activate OSD menu. 2.3.1 Picture control Figure 6 BRIGHTNESS: Adjust the image and background screen brightness CONTRAST: Adjust the image brightness in relation to the background. RATIO SELECT: Select screen ratio between FULL SCREEN (16:10) and NORMAL (4:3). 2.3.
H POSITION: To adjust the image horizontally left or right. V POSITION: To adjust the image vertically up or down. PHAES: To adjust the focus of the display. H SIZE: To increase or decrease the horizontal size of image. 2.3.3 OSD control Figure 8 H POSITION: To adjust the OSD menu horizontally left or right. V POSITION: To adjust the OSD menu vertically up or down. 2.3.4 Color control COLOR mode : Cool mode: Bluer and brighter. Warm mode : Redder and closer to paper white.
Native mode : White color a natural tint. sRGB mode: Sets your screen colors to adapt to the color standards used in the image technology industry. User Mode: RED: Red color adjustment. GREEN: Green color adjustment. BLUE: Blue color adjustment. MEW: Include STANDARD, SCENERY, THEATER picture modes.
2.3.5 Enhance control LANGUAGE: Language selection. AUTO: Auto adjust display mode to its utmost performance according to VGA setting. RESET: Reset the currently highlighted control to the factory setting.
3. Troubleshooting If you encounter problems with the monitor, please refer to the following tables. 3.1 Display problems Problem & Question Possible Solution No picture, the LED *The Signal Cable should be completely connected to the indicator is light up computer *If it is red, then the monitor and the computer are in dormancy mode. You need press your keyboard or move the mouse to reactivate the system. *If it is green, please adjust the brightness and contrast by OSD menu.
3.2 Tablet problems Problem & Question Possible Solution The pen is no function *Check the battery whether worn out? If Yes, replace the pen battery *Check whether the pen tip is too short. If yes replace the pen tip. * Re-plug the USB cable. *Restart your computer or your application. The cursor move * Re-plug the USB cable or your computer. incorrectly Cursor not accurate Perform calibration The side switch does not work.
4. Product Specifications 4.1 LCD Display Characteristics Item Specification Product name Tablet Monitor LCD Display Input/output Environmental Display type TFT color LCD Backlight LED Dimension 408.24mm(H)*255.15mm(V) (19 in.) Resolution 1440×900 (WXGA) Pixel pitch 0.285×0.
4.2 Tablet Characteristics Input system Electromagnetic induction Pen Stylus pen Tablet resolution 4000Lpi Pen Pressure 2048 levels Pen Power Consumption 950uA(Max) Reading accuracy ± 0.5 mm(center) Data Report Rate 133 points per second Data Interface USB interface (USB2.
Appendix B Factory Preset Timing Table NO 20 Horizontal Vertical Dots x line Freq.(kHz) Freq.(kHz) 1 720 × 400 31.47 kHz 70 Hz 2 640 × 480 31.47 kHz 60Hz 3 640 × 480 37.86 kHz 73Hz 4 640 × 480 37.50 kHz 75Hz 5 800 × 600 37.88 kHz 60Hz 6 800 × 600 48.08 kHz 72Hz 7 800 × 600 46.87 kHz 75Hz 8 1024 × 768 48.36 kHz 60Hz 9 1024 × 768 56.48 kHz 70Hz 10 1024 × 768 60.02 kHz 75Hz 11 1280 × 1024 63.98 kHz 60Hz 12 1280 × 1024 79.98 kHz 75Hz 13 1440 × 900 55.
