Instructions / Assembly

Easy Installation: It includes all necessary accessories and also comes with

installation diagrams as well as installation methods for quick and easy installation.

How to Install

1. Assemble two sets of vertical rods first.

2. Install the inner plug cap and put the inner plug cap on both ends of the tube.

3. Install the flat pipe mesh.

How to Fix the Snap Ring

1. Remove the retaining snap.

2. Press the snap ring sleeve against the tube.

3. Install and secure the snap ring, pressing down the bottom.

Installed in the Soil

1. Please use a hole punch (not included) to make a hole in advance or dig up the soil

so that the tube can be inserted 11.81 inches.

2. Bury the tube with both feet in the soil.

3. Vertically install the fence to maintain the overall balance.

Installation on Hardened Floors

1. Please install it on the special footing (included) and then use a drill bit (not

included) to drill holes in the ground to fix it.

2. Drill hole depth 0.98in.

3. Installed in the right place and screwed into the ground and fixed tightly.

4. Insert the screen into the foot and fix it with butterfly screws.

Method of Connecting Multiple Sets

1. Remove the single-ring fixing piece when connecting, and fix the upper and lower

parts with the double-ring fixing piece.

2. Double ring fixings installation: remove the fixing snap, and then press into the

snap groove.