Use and Care Manual

File E300251 Vol. 1 Sec. 1 Page 2 Issued: 2005-12-23
and Report Revised: 2011-04-15
CONSTRUCTION DETAILS:
Section General - The following construction items are described in
Sec. Gen.
Abbreviations
Wire Connections
C-UL Requirements
Grounding
Spacings
Sharp Edges
Corrosion Protection
Markings
Internal Wiring
Marking Methods
Electrical Connection
Date of Manufacture
Conditions of Acceptability - The following items should be taken into
consideration when evaluating components in end-product applications.
(1) Normal Temperature Test should be considered in the end-use product.
(2) Method in which the unit is mounted should be considered with respect
to the end product.
(3) The need for additional Markings per Section 54 of UL 1026,
Fourth Edition, and/or C22.2, No. 1335.1-93, Section 7, is to be
determined in the end use product.
(4) The need for a Carton Marking per Section 55 of UL 1026,
Fourth Edition, and/or C22.2, No. 1335.1-93, Section 7, is to be
determined in the end-use product.
(5) The need for an Instruction Manual per Sections 56-59 of UL 1026,
Fourth Edition, and/or C22.2, No. 1335.1-93, Section 7, is to be
determined in the end-use product.
(6) Length of the power supply cord should be considered in the end-use
product.
(7) Models BBQ120 and BBQ120P are for indoor use only and not intended to
use on solid fuels.