Instructions / Assembly

1.Product Specifications
Assembly Size 12.6*55 (inch) Package Size 13.7*8.6*7.8(inch)
Product Net Weight 2.6(lb) Product Gross Weight 3.3(lb)
Application Range
Product Material
Package List
2.Installation Instruction
3.How to Use
4.Please Note
User Manual
Suitable for collection spherical objects with diameters of 0.7-1.5 inch
(golf，pingpong，Acorns Balls，Hickory Nuts Large )
Handle Stick: 201. Collector(wire included): 304 stainless steel. Connector
Joint: Aluminum.
4 x Handle Sticks, 1 x Collector,1 x Collector Hook,1 x Ball Release Stand,
1 x User Manual
1.Grab both ends of the collector hook A, and slightly open it to allow the ends to stick into
the nuts on the 2 sides of the collector B.
2.Remove the screws on the collector hook A, find the handle stick with screw hole and insert it
into the connector on the hook, then tighten the two parts with screw.
3.Put the handle sticks together in proper order and install the rubber grip to finish the
installation.
1.This product is designed for collecting objects on lawns and rough grounds. Simply roll the
collector over with hands to gather things fast.
2.When using this product on smooth floors, please do not roll the ball collector over, for the
to be gathered object can bounce away when it meets the collector. Just put the collector
downward onto the to be gathered object to collect it.
3.Place the ball release stand on a bucket or basket, place the collector on the stand and press
it, the metal wires will separate and the balls will fall into the container.
1.Please clean the product with a cloth or wash it with water and let dry after use.
2.When the product is not in use for a long time, please hang it or store it in a carton.