User Manual

Warm Tips

Thank you for choosing our product. We hope you will enjoy using the

appliance. Read the operating instructions carefully before putting the

appliance into operation. Keep the instructions, the receipt and, if possible,

the box with the internal packing. If you give this device to others, please

also enclose withthe operating instructions.

Using the Appliance

COOL

HEAT

12V 110V

DC AC

COOL

HEAT

12V

110V

DC AC

OFF

1. Connecting to the right power

1.1. Before you plug into the power outlet,

make sure that the mains voltage corresponds

with the appliance. Refer to the rating plate

for voltage details.

1.2. Connect the appliance to power outlet

with appropriate voltage.

1.3. Turn on the motor vehicle’s power engine,

then connect to DC power.

2. Using the Chilling or Heating Function

2.1. Push switch to “COOL” position. Cooling starts when the green indicator lights

up. Temperature can reach 18 to 20°C below room temperature.

2.2. Push the switch to “HEAT” position. Heating starts when the red indicator

lights up. Temperature can reach up to 50 to 60°C.

3. Terminating operation

There is no automatic shut-oﬀ so product will keep running as long as it is

connected to a power supply and switched on. To stop the appliance, switch to OFF

mode or unplug.

Intertek

3078034

Mini Fidge

Voltage:110-120-&12V

Cool Mode (110V):56w

(12V):45W

Warm Mode (110V):45w

(12V):40W

Climate Class: T