Front Load Washer Models: FWEB8002XX FWEB9002XX FWEB9503BS FWEB10502XX FWEB10503BS WFC80602RT-X WFC90604RT-X WFC105604RT-X
Choosing water tap Connecting Water Inlet Hose to the Washer Turn the nut clockwise till the nut is tight while holding the hose. Turn the nut counterclockwise after turning the faucet off if you want to detach the water inlet hose. Connecting the Drain Hose Above 16mm Water leaks here. Connecting the inlet hose Note：It is recommended the use of the provided hose. How to attach the inlet hose 1.Loosen the four screws and slide the top of the inlet hose joint (section A in the figure) onto the faucet.
predefined washing time based on soiled level, from lightly soiled to heavily soiled for everyday wash, the operation is flexible and fast.
（ ）
STACKING KIT SHELF By which your dryer can be fixed on top of your washing machine to save space and to facilitate loading and unloading your dryer in the higher position. Press “Temp” button once, for the programme default temperature to be displayed on screen. Press “Temp” again to switch the temperature within temperature range. Press“Speed” button once, default speed display on screen. Continue to press “Speed” button, speed increasing to maximum. Press “Speed” again, minimum speed display on screen.
Child Lock Anti-wrinkle Delay end This indicator will lights up: Child lock function activated, all buttons (except for power button) locked. This indicator will lights up: Anti wrinkle function activated. This indicator will lights up: Delay end function activated. Door lock This indicator will lights up: 1. Machine is running a programme. 2. High Temperature in drum. 3. High Water level. Add clothes This indicator will lights up: Door can be opened to add or remove clothes.
https://www.whirlpool.com.sg/warranty-registration.
