Product Manual

Pairing Steps:
Note: You don’t need to pair signals if there are images on screen.
You only need to pair if no images or after you received a new second
camera pair to the current monitor.
Step 1 : Make sure the camera and monitor are powered .
Step 2 : Presses the “Menu'' button of the monitor into menu mode
until the “ Pair ''appear on the monitor ,then press the ''+'' button to
pair the signal .
Step 3 : Just wait for the image appearing .
6 . 5 Inch Monitor Details & Installation
I . The bracket of monitor could be installed with below 4 steps: