Product Manual

Thank you !
Troubleshooting
1 After installation, you turn on the monitor and camera power
without images, at the same time, the monitor turns on for five
seconds and then goes black, which means something wrong with the
camera. You need to check that the camera is plugged in correctly. If
the camera's power cord is not connected correctly to the headlights,
there is no images. Or you can touch the camera with your hand, if
the camera gets hot, it's powered on; if the camera surface
temperature does not change, it is not connected to the power. Then,
you need to reconnect to the power.
2 If your car is a BMW, Benz, or VW brand car, you will find the
image flashing all the time after you install this system. Because
BMW, Benz, VW's cars repel foreign devices and emit interfering
currents. You need to add a relay or filter between the camera and
the lamp circuit to form a rated dc power supply.
When you turn off the engine and keep the key in ACC, if the image
does not flicker and the image starts to flicker after starting the