Product Manual

8. Warm Tips ：
If there is no image after you install :
1）Please check connections of power source. (Check if the camera
and monitor are powered on)
2）Check if you reverse the positive wire and negative wire (For
example: The backup light black is positive, green is negative ,please
don’t backward them.)
3）If you cannot identify which wire is positive, you can connect the
black wire to ground (metal part on vehicle), then to test the positive
wire, which will protect the camera.
4）The red clip may not be in good connection. Take it off and try it.
9. 7 Inch Monitor Details & Installation
I . The bracket of monitor shoud be installed with below 4 steps: