Product Manual

5. Installation Video and Signal Repairing
I. Please watch below video on YouTube to help you install the
system.
https://youtu.be/tumtLSV-qZU
If you cannot open this link, it may be caused by the wrong type of
software. So you can search the video ID: tumtLSV-qZU on
www.youtube.com
If you don’t find it, please contact us with the Email, we will provide
you a link.
II. Signal pairing .(For second camera or no images on screen)
(The system signals be paired when you received, just need to pair
signals between camera and monitor when lost signals and never
come back or you changed a new camera.If you have a good signals,
please don’t pair the signals yourself, sincerely)
Pairing Steps:
Note: You don’t need to pair signals if there are images on screen.
You only need to pair if no images or after you received a new second
camera pair to the current monitor.
Step 1 : Make sure the camera and monitor are powered .
Step 2 : Press the “Menu'' button of the monitor into menu mode
until the “ Pair '' icon appear on the monitor ,then click the ''up''