Product Manual

II. Please test the monitor and camera before installation .
After you receive the system, you must test the device before
installation. Please reference the way below image showed.
(1) Plug power cords to the monitor and merged the power wires to
camera ,red-red, black-black.
(2) Loose the screws on green adapter, then insert the red
wire(copper wire) to Positive(+) slot, and the black wire(copper wire)
to Negative(-) slot.
(3) Plug to cigarette lighter and turn on the red switch. If you see
image on monitor, it means the system works well.
After testing, you need to make sure that the image appears on screen,
Then you can mount the monitor.