Product Manual

13. Camera Installation
The camera was fixed by the original screws on the license
plate, no need drill more holes to hook up the camera, easy
to install. The camera lens could be rotated 90 degree upside
down, you can loose the screws on the back of camera.
14. T-Taps:
We have prepared a T-Taps adapter to better protect the cord of the
reversing back-up light or tail light, please reference the picture
below, which makes the installation easier.
Step1-step4:
Step1: Plug the power cord of the reversing lamp into the first hole of
the clamp.
Step2: Put the backing auxiliary wire into the second hole of the
clamp (the hole is blocked to prevent leakage)
Step3: Clamp the adapter, and clamp the iron sheet to the bottom.