Quick start Guide 4G USB Dongle IH500
A PPEARANCE AND FUNCTION DESCRIPTION Cap Tag Front Cover Reset Button LTE Mobile Broadband SIM Card Slot Signal Light – Display network status SIM card slot – Supports SIM/USIM card Reset Button – password can be reset Tag – Device information USB Port Signal light Back Cover
N ETWORK S TANDARD ： Supports LTE-FDD: Band 2 / Band 4 / Band 5 / Band 7 / Band28ab Supports HSPA+/UMTS：1900MHz / 850MHz Maximum Downstream Rate：LTE-FDD 150Mbps. S IGNAL LIGHT STATUS Red Light ON：searching Network/Fault Green Lights On：Access network successfully T AG 4G Dongle Model No.
S ET UP YOUR USB S TICK Slide the back cover off the USB Stick, and insert your SIM as shown, insert the card as shown. Plug the USB Stick firmly into your computer’s USB port. A DMIN ACCESS – GUI After connecting to the USB stick, enter the following URL in the Browser: http://192.168.0.
Status – check the status of the current connection Connect/Disconnect – connect to the internet via the mobile phone network, to browser the web or use email.
- Login the GUI and open the network setting View, click “network settings”>” network selection”, and see if you can connect one of the networks listed. - Set up APN, resetting up the APN of the SIM card again. - Contact: Support and check that data services are enabled on your account. C AUTIONS Please read the following precautions before using: - Input voltage requirements: DC 5V/1A - Handle with care and keep the product in a clean and dust-free place.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.
