User Manual

● When the power is turned on, the blue light comes on (goes off within
2 seconds) and enters the standby mode. (goes off in 2 seconds) and
enters standby mode.
●When charging the watch, the blue light will come on and go off after
20 seconds.
● When charging the phone, the blue light will come on and go off after
20 seconds.
●When charging TWS headphones, the blue light will come on and go off
after 20 seconds.
● When the wireless charger is charging all three of your devices at the
same time, the blue light will come on and go off after 20 seconds.
● When any of your devices are fully charged, the light will not be displayed.
● The blue light will continue to flash when the wireless charger is outputting
abnormal power or when a foreign object is detected.
M17
User Manual
3-in-1 Magnetic Wireless Charger Station
USB-C interface
Watch charging position
Mobile phone
Earphone charging position
Indicator light
1
1
2
3
4
5
5
4
2
3
Dear customers, thank you for purchasing our products. In order to understand
the product further. Please read this manual carefully before use. We wish you
a pleasant experience!
Preface:
●Turn on the power, the device will enter the standby state after the blue
indicator flashes once.
●Place the Apple Watch in the stand charging area for wireless charger.
●Place the mobile phone with magnetic suction on the magnetic suction
position for wireless fast charger.
●Connect the wireless charging headset to the headset charging slot for
wireless charger.
Using instructions
Indicator light description
●Please confirm whether your mobile phone has wireless charging
function before use;
”Check whether the phone deviates from the wireless inductive
charging area of the charger;
‘Whether a non-metallic protective case is used for charging mobile
phones, and the thickness of the protective case is recommended
not to exceed 4mm;
When metal objects touch the charging area, the charger will
automatically identify and provide power off protection.
When the temperature of the charger is too high, it will automatically
start the protection.Please unplug the power supply first and use it
after the charger recovers the temperature.
How to solve abnormal charging:
Q:Why is there heating in the charging of wireless charging inductive
products?
A:During the charging process, there will be a certain loss of
magnetoelectric conversion, which will be converted into heat,
causing the mobile phone and charger to generate heat, which
is a normal phenomenon.
Suggestions:
●When the device is fully charged, disconnect it from charging in
time to avoid a long cycle of charging, which may lead to continuous
heating of the device and charger;
It is recommended to stop running the background software when
charging the phone.
●Use indoor or under dry environment, avoid placing or using in
the environment of high temperature, humidity, strong static
electricity and strong magnetic field;
For your safety, please do not use wet hand plug and unplug
electrical appliances;
●Avoid putting it in a place easily accessible to infants and children;
●Do not use the product if it is contaminated with water or dirt;
●Non-professional personnel are not allowed to open and repair
without authorization.
●iPhone13Pro Max/13por/13/13mini/12Por Max/12por/12/12mini/
●Apple Watch 7/6/SE/5/4/3/2
●Airpods/Third Generation/Pro/3/2
Compatible Devices
Input: 9V 2A 12V 1.5A
Phone output: 15W Max
Earphone output 5W Max
Watch: 3W Max
Input interface: USB-C
Specifications
Safety Notes
Q&A:
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.
3-in-1 Magnetic Wireless Charging Station
● The blue light will continue to flash when your adapter or data cable is low
on power.
(For the best charging experience, please use QC3.0/20W power adapter
or PD20W or larger power adapter)
Radio Standards Specification RSS-Gen, issue 5 This device was tested for uncontrolled environment operations. To comply
with RF exposure requirements, a minimum separation distance of 20cm
must be maintained between the user’s body and the product.
Hereby, Shenzhen Yifeng Intelligent Technology Co., Ltd. declares that
the product type M17 is in compliance with following Directives: Radio
Equipment Regulations 2017, Electrical Equipment (Safety) Regulations
2016 and The Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Regulations 2012. The full text of the
UK declaration of conformity is available at the following internet address:
https://www.YFZN.com/
Shenzhen Yifeng Intelligent Technology Co., Ltd.
10th Floor, Building 2, Chaxi, Zone B, Huafeng First Science Park,
Hangcheng Street, Gushu, Baoan District, Shenzhen, China.
This device was tested for uncontrolled environment operations. To comply
with RF exposure requirements, a minimum separation distance of 20cm
must be maintained between the user’s body and the product
Hereby, Shenzhen Yifeng Intelligent Technology Co., Ltd.declares that the
product type M17 is in compliance with Directives 2014/53/EU & 2011/65/
EU. The full text of the EU declaration of conformity is available at the
following internet address: https://www.YFZN.com/
Declaration of Conformity
EU:
Declaration of Conformity
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two
conditions:This device may not cause interference.This device must
accept any interference, including interference that may cause undesired
operation of the device. RF exposure statement:The equipment complies
with IC Radiation exposure limit set forth for uncontrolled environment.
This equipment should be installed and operated with minimum distance
10cm between the radiator and your body.
IC Caution: UK: Phone&Earphone
Radiated H-Field -4.7 dBuA/m (@10m)
TX/RX Frequency Range 110-148kHz(Only for EU&UK)
- English:
Cet appareil contient des émetteurs / récepteurs exemptés de licence
conformes aux RSS (RSS) d'Innovation, Sciences et Développement
économique Canada. Le fonctionnement est soumis aux deux conditions
suivantes:Cet appareil ne doit pas causer d'interférences.Cet appareil
doit accepter toutes les interférences, y compris celles susceptibles de
provoquer un fonctionnement indésirable de l'appareil.Déclaration
d'exposition RF:L'équipement est conforme à la limite d'exposition aux
radiations de la IC établie pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec une distance minimale de 10cm
entre le radiateur et votre corps.
- French:
Watch
Radiated H-Field -25.98 dBuA/m (@10m)
TX/RX Frequency Range 300-350kHz