True Wireless Earphones
Notice Excessive repetition of the action of pushing the earphone may affect the service life and after-sales service. It is recommended to push the earphone only when it is necessary to use theearphones. Wearing foam ear tips can increase the stability and airtightness, and you can choose whether to install it or not which according to your experience.
Product & Accessories Type-C Interface Power Indicator light Charging Case Status indicator light Speaker Touch area Earphones User Manual Microphone USB-C Charging Cable Packing list: Earphones(pair), Charging case, USB-C charging cable, User manual
Power on & Power off Power on： Method one: Take out the earphones from the charging case, the earphones will boot automatically. 3S Method two: In the off state, press and hold the touch area of the earphones for 3 seconds. Power off： Method one: Put the earphones into the charging case, the earphones will shut down automatically. Method two: Turn off the Bluetooth switch of mobile phone, and the earphone will automatically shut down in three minutes.
Operations & Functions Pairing： After being taken out from the charging case, the earphones will be paired automatically and then flash blue lights. 1) Take out the earphones from the charging case and confirm that the earphones are waiting to be paired. At this time, the two earphones flash blue lights quickly. 2) Turn on the bluetooth of the mobile phone, find the corresponding bluetooth name and click to confirm, the voice prompt "connected" indicats that the pairing is successful.
Operations & Functions or Touch×1 Press 2s or Press 2s Touch×2 or or Press 2s Touch×2 or or Touch×2 Touch×3 Touch×1 Touch×1 Special Instructions： Some Android phones do not support the synchronization of the earphones volume with the phone volume. The volume operation of the earphone can only adjust the volume of itself,which is not synchronized withe the adjustment of the phone volume.
Operations & Functions Reset： When two earphones can’t be paired, please see below methods to reset . Steps 1- Delete the corresponding bluetooth connection record from the phone. Indicator Light / Take both earphones out of the 2- case and touch each earphone 5 times, then they will turn off. The blue light and the red light will turn on at the same time for 1 second and then turn off.
Indicator light description Earphone： No pairing Waiting for pairing Paired successfully Red and blue lights flash quickly The indicator light flashes blue The indicator light is off Power on Power off Incoming call Red and blue light up for 1 second The indicator light is off Blue light flashes twice every 3 seconds Charging End of charging Red light is always on The indicator light is off Charging case: Charging End of charging When charging, the indicator light will keep flashing red.
Indicator light description Earphones charging Power shortage reminder When put into the charging case, the charging case will turn on the white light for about 4 seconds and then turn off. Red light flashes quickly.
Precautions 1- Try to use the minimum volume that we can accept, high volume for a long period of time will lead to permanent damage to hearing. 2- Keep the earphones and accessories out of reach of children. Children should use the earphones under the supervision of the adults. 3- Don’t immerse the device in water. Avoid using this product when swimming, diving or showering. 4- Don’t use this product in humid, dusty or near the magnetic field, to avoid causing internal circuit failure.
FCC Requirement Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
特別提醒 過度重複推取耳機的動作可能會影響耳機使用壽命和售後服務， 建議僅在需要使用耳機時推出耳機。 佩戴海綿耳塞可以增加穩定性和密封性，您可以根據自己的 佩戴體驗選擇是否安裝。
產品示意圖 充電接口（Type-C） 指示燈 耳機指示燈 揚聲器 觸控區 麥克風 説明書 充電綫 包裝清單：壹副耳機，充電盒，Type-C 充電綫 , 使用說明書
開機和關機 開機 方法一：將耳機從充電盒取出， 耳機會自動開機。 3S 方法二：長按耳機3秒鐘。 關機 方法一：將耳機放入充電盒，耳 機會自動關機。 2S 方法二：關閉手機的藍牙開關， 五分鐘後耳機會自動關機。 方法三：無連接狀態下，長按 觸控位4秒。 4S
配對指南 耳機之間配對 開機後，兩個耳機之間會自動配對，配對後兩個耳機閃藍燈。 耳機與手機配對 1) 將耳機從充電盒中取出，確認耳機在待配對狀態，此時兩個耳機快速閃藍燈。 2) 打開手機藍牙設置，搜索藍牙信號。 3) 找到对应的藍牙信號名稱,點擊配對連接藍牙耳機，此時會彈出請求配對的對話框，點擊 連接，耳機語音提示“connected”，配對成功。 4) 配對成功後，再次使用時耳機和該手機會自動連接。
操作 or 長按 2s or 長按 2s or 觸碰×2 or 觸碰×2 觸碰×1 觸碰×1 觸碰×1 觸碰×2 or 長按 2s or 觸碰×3
耳機重置 重置步驟 刪除手機上對應的連接記錄。 指示燈 \ 兩個耳機各輕觸5次，再次開機，耳機會紅藍燈互閃，進入待配對狀態約10秒內兩個 耳機變爲藍燈單閃，表示兩個耳機之間已完成重新配對。 重新與手機連接後即可使用。 \ 充電 耳機：將耳機放入充電盒，充電盒會自動爲耳機充電，充電時耳機會顯示紅燈充電盒：請 使用隨設備附帶的充電線爲充電盒充電。
指示燈 充電盒狀態 指示燈 充電 指示燈會持續的漸亮漸暗 耳機充電 放入充電盒時，充電盒會亮白燈，然後 持續亮燈約4秒后熄滅。 充電完成 紅燈常亮 缺電提醒 白燈閃爍4秒后熄滅 耳機狀態 指示燈 耳機未配對 紅色和藍色燈交替互閃 耳機等待手機配對 雙耳藍燈單閃 與手機配對成功 指示燈熄滅 開機 紅色燈亮兩秒 關機 指示燈熄滅 有電話呼入 每隔三秒快閃藍燈兩次 充電 紅燈常亮 充電完成 指示燈熄滅
耳機提示音 狀態 提示音 開機 power on 關機 power off 電量低 battery low 與手機配對中 pairing 與手機配對成功 connected 與手機斷開連接 disconnected 調整音量至最小 “Didi” 調整音量至最大 “Didi”
特別提醒 特別提醒 部分安卓手機不支持耳機音量與手機音量同步耳機的音量操作只能調整耳機自身音量，與 手機音量的調整不同步。 注意事項 1. 儘量使用滿足所需的最小音量，長時間高音量使用會導致聽力的永久性損傷。 2. 請將設備及配件放置在兒童接觸不到的地方，兒童應在成人監護下使用設備。 3. 請勿將本設備泡於水中。避免在游泳，潛水，跳水，淋浴時使用本產品。 4. 請勿在潮溼,灰塵多或靠近磁場的場合使用本產品，以免引起內部電路故障。 5. 避免將耳機放置於-15℃以下或50℃以上的環境中保存。 6. 避免在0℃以下的環境中進行耳機或充電盒的充電操作。 7. 請勿將耳機長時間放置在窗臺，汽車儀表盤等陽光直射的地方。 8.
