SDS

Safety Data Sheet Version: V1.0
According to 2012 OSHA Hazard Communication Standard
(29 CFR 1910.1200)
REPORT NO.: LCS170610002AS 001
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD.
Page 6 of 12
(vacated) TWA: 5 mg/m³
respirable fraction synthetic
TWA: 15 mppcf natural
Chromium
7440-47-3
TWA: 0.5 mg/m³ TWA: 1 mg/m³
(vacated) TWA: 1 mg/m³
IDLH: 250 mg/m³
TWA: 0.5 mg/m³
Molybdenum
7439-98-7
TWA: 10 mg/m³ inhalable fraction
TWA: 3 mg/m³ respirable fraction
(vacated) TWA: 10 mg/m³ IDLH: 5000 mg/m³
(b) Appropriate engineering controls
Engineering Measures
Showers
Eyewash stations
Ventilation systems
(c) Individual protection measures, such as personal protective equipment
Eye/Face Protection
Face protection shield.
Skin and body
Protection
Wear protective gloves and protective clothing. Long sleeved clothing. Chemical
resistant apron. Impervious gloves.
Respiratory
Protection
No protective equipment is needed under normal use conditions. If exposure limits are
exceeded or irritation is experienced, ventilation and evacuation may be required.
Hygiene Measures
Handle in accordance with good industrial hygiene and safety practice. Do not eat, drink
or smoke when using this product. Take off contaminated clothing and wash before
reuse. Avoid contact with skin, eyes or clothing. Wear suitable gloves and eye/face
protection. Contaminated work clothing should not be allowed out of the workplace.
Regular cleaning of equipment, work area and clothing is recommended. Wash hands
before breaks and immediately after handling the product. For environmental protection,
remove and wash all contaminated protective equipment before re-use.
Section 9- Physical and Chemical Properties
Form Solid
Color Silver
Odour
No available
pH
No available
Melting point/freezing point
No available
Boiling Point and Boiling range
No available
Flash Point
No available
Upper/lower flammability or
explosive limits
No available