User's Manual

1211
5) Indicators
Status LED indicator
1.Recording:LED indicator will be always on.
2.Standby:Status LED indicator will be off.
3.Upgrading: Status LED indicator will keep flickering.
Power LED indicator
Power LED indicator will keep on when power on.
Status LED indicator
Power LED indicator
6) ADAS
ADAS function can be found in the list of Settings. ADAS is
off by default, it only works when the device is connected to
“Yi DashCam” App. After ADAS is opened at the speed of
over 50 km/h, it will make the sound prompt
when recognizing the driving risk.
Note:
This device will NOT automatically apply brakes, control the steering, or control other
functions of your vehicle to avoid traffic accidents. Therefore, it is the sole responsibility of the
driver. These device will automatically power on and charging will begin when you start your
car. There are many variables that can cause these ADAS features to not function correctly
and therefore it is the sole responsibility of the driver to operate their vehicle according to all
the local safety and traffic laws.
Always use your best judgment, and operate the vehicle in a safe manner. Do not become
distracted by the device while driving, and be fully aware of all driving conditions. Minimize the
amount of time spent viewing the device screen while driving.