Specifications
Table Of Contents
- 说明书-KG-159
- 客户:
- PRODUCT INFORMATION AND REQUIREMENTS
- 按键工作的负荷力,按键平面中
- 使用规格
- 在温度55℃下搁置48小时,
- 在遥控器装有电池的条件下,
- 五.外观尺寸图/Dimension Drawing
- 六.软件功能software function
- 七.发码格式与波形/C O D E F O R MA T A N D W A V E
- 八.电气原理图 / E L E C T R I C A L S C H E M A T I C
- PCB 图 / PCB C H A R T
- 按键弹力测试 Push button elasticity test
- 十二、有害物质检测报告清单
- 十一 .遥控器(物料清单)/ R E M O T E C O
- 13.2. 包装外观检验 작업명세서의 중요설명:
- 箱面纸不许拼接、 缺材、露楞、折皱、透胶、
- FCC Statement警告语
WEATHERING
PERFORMANCE
高温贮存
High temperature
storage
在温度55℃下搁置48小时,
恢复2小时后测试
Put the RC under the
temperature of 55 C for 48
hours, then test the RC after
2 hours' recovery
无异常
Without exception
正常
normal
恒定湿热贮存
Constant heat and
humidity storage
在温度40℃下, 相对湿度98%
的条件下搁置48小时, 恢复4
小时后测试
Put the RC under temperature
40 ℃ , relative humidity 98% for
48 hours, then test, the RC
无异常
Without exception
正常
normal
低温贮存
Low
temperature
storage
在温度-25℃下搁置48小时,
恢复2小时后测试
Put the RC under the temperature
off -25 °C for 48 hours, then test
the RC after 2 hours' recovery
无异常
Without exception
正常
normal
温度变化贮存
Varying
temperature
storage
遥控器承受如下的温度变化实
验5个循环后,即: 室温->-
10℃(3小时) ->40℃(3小
时) ->室温, 恢复2小时后测
试
RC experiment under
thefollowing temperature
changes after five cycles :
room temperature ->10 ℃ (3
hours) -> 40℃ (3 hours) - at
room, test after 2 hours
recovery
无异常
Without exception
正常
normal
振动实验
The
vibration
test
水平方向振动 :频率10-20-
10Hz 位移0.75mm,轴线扫频5
个周期
Frequency of 10 - 20 10HZ,
displacement is 0.75mm, axis
frequency sweep 5 cycles
无异常
Without exception
正常
normal
b.频率30-55-30Hz 位移
0.75mm,轴线扫频5个周期
The frequency of 30-55-30Hz is
displaced by 0. 75, and the axis
frequency is swept for 5 cycles
无异常
Without exception
正常
normal