Specifications

间距均匀、 单钉距80-100mm ，双钉距80-
100mm 。首尾钉至压痕边线的距离为13±7mm
。钉合接缝处应钉牢、 钉透，不得有叠钉、 翘
钉、不转脚钉等缺陷
刀口无明显毛刺， 成箱后叠角漏洞直径不超过5mm
.
VISUAL INSPECTION
item s standard
产品
conclusion
储运标志
package
symbol
按《关于我司SKD包装箱侧唛增加印刷标识知
会(2016-1-6)》 执行，印在纸箱两侧面左上角处
正常
normal
全检标签
pass mark
供应商全检合格后在纸箱标签右侧贴全检标
签，纸箱标签则统一贴在储运标志右侧。 全检
标签样式统一按KTC提供的模板
印刷
printing
空白（只保留储运标志）， 纸箱及标签上不得
出现供应商任何信息， 包括公司名称、 电话、
地址、网址等
Blank (only package symbol), no information from the
supplier including company name, phone number,
address, internet address, etc. is displayed on the
cartons and labels
压痕线
creasing
折线居中， 不得有裂破、 断线、重线等缺陷，
箱上不得有多余的压痕线
In the middle of the broken line, no defects such
as crack, broken coincident wire, etc. shall not be allowed
to have extra indentation line on the
box.
刀口
tooledge
箱钉
상자를
结合
결합하다
钉合搭接舌宽为35-50mm ，箱钉应沿搭接舌中
线钉合，排列整齐， 偏斜不超过5mm。
products
正常
normal
正常
normal
正常
normal
正常
normal
正常
normal
正常
normal
正常
normal
正常
normal
正常
normal
正常
normal
正常
normal
正常
normal
正常
normal
According to《The notice of increasing
symbol on KTC SKD packing box》，printed
on both sides of the top left corner
After the supplier is fully qualified,
the label is affixed to the right side
of the carton label, and the label of
the carton is attached to the right side
of the storage and transportation mark.
Full label style uniform according to
the template provided by KTC
There is no obvious burr on the knife edge,
and the diameter of the hole in the folding
angle after packing is no more than 5mm
Uniform spacing, single nail pitch 80- 100mm,
double nail pitch 80- 100mm. The distance from
the head and tail nails to the indentation edge is
13± 7mm. Nailing joints should be firmly nailed,
nailed through, shall not have overlapping nails,
warping nails, do not turn nails and other
defects
The width of the lap tongue is 35- 50mm. The
box nails should be nailed along the middle
line of the lap tongue, arranged neatly and
with a deviation of no more than 5mm.
Visual
inspection