User's Manual

6
4.1 Basic Button Operations
Button & Jack
Operation Description
Power ON/OFF
Press and hold the power button for 2 seconds, the device power is turned ON.
When you press the power button for 2 seconds during use, the power is OFF.
.
PTT Button
The radio transmits messages when pressing PTT button. It receives messages when
releasing the PTT button.
In order to have clear sound when transmitting, it is recommended to speak around
5~10cm away from the MIC.
Volume/Menu
+/- Button
+/- Button can adjust the call sound by using, and if you press the [+] button,
the sound will be increases if you press the [-] button, the sound will be
smaller. In the menu, you can move to the menu item.
Channel Menu
UP / Down Button
Regularly UP / DOWN buttons are for the channel selection.
In the menu screen, it moves through different functions (UP&DOWN).
Zone Button
When pressing Zone button, zone registered in the program will be selected in order.
You can choose channel by using UP/DOWN button in selected zone.
Menu Button
When pressing the menu button one more time while in the menu, it moves to detailed
menu section of the selected one.
Cancel/Return
Button
Press the button to return to previous item in menu.
In the menu setting screen, it functions as cancel button.
P1, P2, P3
Button
Short press is Programmable Key.
Long Press of button more than 2 seconds is as follows:
P Button
Short Key
Long Key
P1
Programmable
Key Lock ON / OFF(Temporarily)
P2
Programmable
Flash Light ON / OFF
P3
Programmable
Vibration ON / OFF
Contact Button
Press the button to enter the contact list programmed into the radio such as Private,
Group and All Call.
EAR/MIC Jack
This jack is used to connect external speaker Mic, and headset, etc
LED indication
This LED displays the operating status of the device
① TX : Red Lamp. ② RX : Green Lamp.
③ Green blinks: when the frequency is the same but the color code does not match.
④ Low Battery: Red Lamp blinks with “beep” sound