Specifications

3
Welcome to Yeoman
Your new Exminster gas stove is perhaps the most advanced
design of modern stoves. Owning such a stove shows
appreciation for exceptional quality.
Please read your manual thoroughly, it’s purpose is to
familiarise you with your stove, and give guidelines for it’s
installation, operation and maintenance. If after reading this
manual you need further information, please do not hesitate
to contact your supplier.
IMPORTANT NOTICE
If your stove is installed correctly, it will give you many years
of excellent service for which it was designed. This appliance
must be installed by a qualified installer, we recommend that
you have a CORGI registered engineer to install your stove
for you.
WARNING
All types of heating appliance can be potentially dangerous.
Correct installation and operating procedures must be
observed when fitting this stove. Some parts of your stove are
protected on their surface with heat proof paint. When the
stove is first used it is normal for it to emit some light smoke,
with an unpleasant smell. Though unpleasant, this is non
toxic and is produced only whilst the stove paint fully cures.
We recommend that you ventilate the room until this
disappears.
The fuel effect components in this stove are made from
Refractory Ceramic Fibre. Please refer to service instructions
on page 16 for safe handling and removal.