Specifications

52 YEOMAN Sport
14.2 YEOMAN GPS Sport XL
Standard connections are shown in Section 2.2.2. In order to
connect a RADAR or autopilot it is necessary to break into the
interconnect cable, which may be extended as necessary. The
following diagram gives guidance on the connections; power
input via the Power cable is not shown.
The NMEA 0183 data out can be connected either to an
autopilot or to a RADAR.
14.3 RADAR data change-over switch (GPS XL and XL)
To allow normal Waypoint plotting and YEOMAN Waypoint
plotting a change-over switch on the input to the RADAR
should be fitted as follows: