Specifications

50 YEOMAN Sport
14. Interfacing details
Interfacing uses standard NMEA 0183 sentences. Some
manufacturers have introduced variants which require a setting
as in Section 11.1.5.
Details of connections to sample GPS units are at the end of
this Handbook. Datasheets on most GPS and other units are
held by YEOMAN and available from them, a dealer or the
YEOMAN website.
An optional Power input cable and connector (2-pin) may be
used. This is connected internally in parallel to the power
elements (red and thin black) of the Power/Data cable.
When power is supplied, say from a cigarette lighter socket, on
the Power input connector then power may be taken off the
(red and thin black) elements of the Power/Data cable, for
instance to provide power to a hand-held GPS.
In the following diagrams, power input is shown on the
Power/Data cable unless otherwise stated.
14.1 YEOMAN Sport
If the GPS has a two wire output, i.e. Data out A (or +) and
Data out B (or -) then connect Data out A to the YEOMAN
White and Data out B to the YEOMAN blue.