Specifications

44 YEOMAN Sport
11.2 Memory Reset
This function resets the YEOMAN to its factory defaults.
ALL INFORMATION YOU HAVE INPUT WILL BE LOST,
INCLUDING CHARTS AND WAYPOINTS. THE PRE-
LOADED CHART LIBRARY WILL NOT BE DELETED.
To reset the YEOMAN to its factory defaults, hold down ) and
switch on the power. Keep the key depressed until the display
reads:
S031
Press < to select Yes, and then press *. Turn the power off
again. When you next turn the power on the unit will have
been reset to its factory defaults.
11.3 Freeze Mode
It is possible to freeze the display while operating the Range
and Bearing facility by holding down > for five beeps. This
allows the Mouse to be picked up and the display read without
alteration. To unfreeze the display press <.