Specifications

YEOMAN Sport 33
On the Waypoint page, it is possible to scroll through and enter
Waypoints other than the current destination Waypoint without
disturbing the autopilot output. The TO flag on the upper edge
of the LCD display will show on the destination Waypoint only.
If the position of the current destination Waypoint is changed,
then the output to the autopilot changes immediately to the
new position from current GPS position. This gives the
powerful ‘point and go’ method of driving an autopilot. If a
Waypoint other than the current destination is selected when
the Waypoint page is left then this new point will become the
destination, starting from the current GPS position.
No facility for holding routes is provided. When a Waypoint is
reached, select the next point by setting the Waypoint either
from the library or by putting the Mouse over next destination
point and updating current Waypoint (pressing *).
To disable output select Waypoint 00.
There is no display of cross-track offset as this can very simply
be picked off the chart using the normal YEOMAN plotting
facilities.