Specifications

30 YEOMAN Sport
When the Mouse is moved, one or two indicator arrows will
illuminate and point to the Waypoint position on the chart.
Waypoints already stored are overwritten if a new position is
entered using the same number. If an existing Waypoint is
accessed, its position will appear on the display and the
indicator arrows will show its position. Consequently a
Waypoint stored in the Waypoint library can be transferred
from chart to chart.
Press / to get Range and Bearing to anywhere on the chart
the Mouse is placed from the current Waypoint position in a
similar way to that in YEOMAN mode.
8.1 Manual Waypoint entry
To manually enter a Waypoint set the Waypoint number
then press * and hold down for six beeps. Set in the
latitude and longitude of the Waypoint, as in Section 4.1.2.
Press * to accept Waypoint.
8.2 Sending Waypoints to a GPS
8.2.1 General
When a Waypoint is entered into the YEOMAN its number and
position is transmitted to the GPS via the NMEA 0183 output.
A GPS with a suitable NMEA 0183 input capability will be able
to accept the Waypoints directly from the YEOMAN.