Specifications

24 YEOMAN Sport

If the chart has been referenced correctly the YEOMAN will

advance to YEOMAN (PLOT) mode after Position 3 has been

accepted. A quick check of the referencing should be made on

a suitable point (such as another grid position) and the display

should be compared with a chart position.

If the referencing has been done incorrectly the indicator

arrows flash and the display shows:

S013

In this case there has been one of:

• Incorrect positioning of the Mouse or chart moved during

referencing. Press # to return to chart referencing and

then reference again carefully.

• Incorrect or inconsistent latitude/longitude of one or more

of the reference positions. Press # to return to chart

referencing and re-reference, this time displaying the

latitude and longitude of the reference points by using (,

as described earlier. Specifically check N/S and E/W

entries are correct and that P1 and P2 are more than

50mm apart.

• One of the reference points is outside the active area.

The indicator lights will flash when over the position.

Select a new reference point or re-position chart.

Depending on the result either correct the reference position

latitude and longitude as described earlier, or mark corrected

reference positions on the chart.