Specifications

20 YEOMAN Sport
Should a chart need to be overwritten at any stage, in chart
select mode hold down * for six beeps. The position entry
facility is displayed and the latitude and longitude of the
positions can be altered.
YEOMAN can be used with any general chart providing that
first three reference points are entered as in 5.1 below. Once
entered these points are stored and build a library of User
Charts.
Some chart publishers are adding special pre-plotted
YEOMAN reference points to charts to make these even
easier to use with YEOMAN, again entering these as in 5.1
below. Similarly once entered these points are stored.
For some of these pre-plotted charts YEOMAN pre-load a
library in the YEOMAN Sport. Details of which such pre-
loaded charts are in your unit are contained in a
supplementary card with this handbook.
If the chart you are using has pre-printed reference points and
is in the list on the supplementary card then go to Section 5.2.
Otherwise follow the instructions below.
5.1 User chart library
The display should flash:
SO42
If not use () to get the display then accept with *.