Specifications

18 YEOMAN Sport
4.1.2 Entering latitude and longitude
Latitude and longitude are entered and displayed in degrees,
minutes and decimal minutes (2 places).
When a latitude and longitude need to be entered, the first
digit of latitude will flash.
S007
Enter the latitude using the () and <> keys. Use >
to set N/S flashing then use ( to toggle as required.
Press > until the first digit of longitude is flashing.
Enter the longitude using the () and <> keys.
To enter a longitude with degrees greater than 99º press )
when the leftmost zero is flashing.
Use > to set E/W flashing then use ( to toggle as required.
Press * to confirm and enter the numbers.
4.2 Magnetic/True headings
All bearings are normally displayed as magnetic. The Setup
section 11.1 describes how to change this to true.
4.3 Default hemispheres
The default hemisphere for entry of all latitude and
longitude is determined by that set in reference position 1 of
User Chart 00.