Specifications

YEOMAN Sport 15
3. Demonstration mode
All you need to get YEOMAN going is 12 volts DC.
A self-demonstrator is supplied to help gain familiarity with
YEOMAN. This is set automatically when shipped and uses
the practice chart contained in the packaging graphic in the
chart case.
After power on, place the Mouse Plot Spot over the point
marked “REF 1”, and press *. Repeat for points 2 and 3.
The YEOMAN will now enter YEOMAN mode and most
functions of the YEOMAN may be used. In Navigation mode a
simulated position and velocity allows familiarity to be gained.
The YEOMAN will exit Demonstration mode the first time that
you reference a real chart. Section 11.1 describes how to re-
enter demonstration mode.
When Demonstration mode is set then the supplied practice
chart must be used and the four red indicator lights will flash
together every 10 seconds in all YEOMAN modes.