Specifications

12 YEOMAN Sport
2. Installation
2.1 General installation notes
The YEOMAN Sport requires a power supply of 12V DC.
Application of overvoltage will blow an internal fuse which will
require the unit to be returned to a service dealer. It is also
advisable to fit a surge protective fuse into the 12V power
connection.
The chart table must not be cut or drilled.
The YEOMAN Mouse curly cable should not be cut or
interfered with in any way.No metal should be within 50mm of
the chart table in any direction. The active area of the chart is
approximately 50mm in from the edges. Indicator lights will
flash when the Mouse is outside this area.
The YEOMAN is reverse polarity protected and is designed
for negative earth systems. Connection to positive earth
systems should only be made by qualified personnel.
Although the YEOMAN is marinised, it should be kept clean
and dry.
Four D ring anchor points are provided to secure the chart
table.
Do not write on the chart cover with indelible pen or ball-
point.