Instruction Manual

ManualsBrandsYENDILI ManualsLavalier MicrophoneYENDILI V10 Wireless Sound Card Lavalier Microphone

Status light function introduction

Warranty Card

Name:

Contact Number:

Problem Description:

Purchase time:

Contact Address:

Microphone + Microphone volume up

Microphone - Microphone volume down

Original Optional action (Original sound mode)

POP Optional action (Popular sound mode)

Warranty

1. Within three months from the date of sale of the product, if there is a performance failure, the product itself and the

outer packaging must be kept intact and free of scratches, and the product of the same model can be replaced

(subject to inspection)but does not include man-made damage.

2. The product is guaranteed for one year from the date of sale, and the accessories are not covered by the warranty.

3. The warranty service is only valid under normal use.

4. All external damage, such as man-made damage, self-disassembly, unpacking, improper use, etc., are not covered

by the warranty.Warranty needs to provide this card, if we fail to provide this card or alter this card, the company has

the right to deal with it as non-warranty.

Mute Mute the microphone

.09

LED indicator

WELCOME MELODY1 MELODY 2

Button

Function

Description

LAUGHTER WELCOME WELCOME

MELODY 1 Special voiceover (Music)

SLAP

KISS

DODGE

MODE

WIRELESS

LAUGHTER Special voiceover (Laughter sound)

Original

Pro

POP

SLAP

Special voiceover (Beating sound)

MIC

VOL

mute

YELL

Special voiceover (Yelling sound)

MIC

MODE

Optional action (Mode options)

DODGE Special voiceover (Escaping sound)

KISS Special voiceover (Kissing sound)

APPLAUSE Special voiceover (Applause)

MELODY 2 Special voiceover (Music)

WELCOME Special voiceover (Welcome)

Live mode switch

Status light function introduction

Short press the po wer button of the sound card or the m ode button of the remote control to switch the m o de;

you can cycl e through the following live broadcast modes: wired + wireless double liv e broadcast, director mode, computer liv e broadcast mode.

The host mode status light displ ays a s follows:

Connect the OTG jack of the sound card and the live mobile phone with an OTG cable according to the connection diagram;

--An Apple mobile phone is plug and play, some Android mobile phones (OPPO VIVO brand) need to open the OTG function

first in the setting interface

--When an Apple mobile phone is connected with OTG, the sound card can also be plugged into a charger or a power bank

to charge the mobile phone

at the same time. (It is recommended to use a mobile power supply to avoid current noise due to access to 220V mains)

Live mobile

Lavalier

sound card

Wired + wireless double live broadcast features:

the real-time sound of the wired headset can be

heard i n the wired headset,

and t he sound of the wired headset can be

broadcast liv e at the same time

Director mode Features:

You can't hear the sound

of the wired headset in the wired head set,

and the wireless micropho ne can hear

it but it will not be broadca st liv e

Features of c omputer liv e broadcast m ode:

Can not hear the so und of the wired

headset in the wired head set,

can hear the wireless microphone but will

not be broadc ast liv e, and the O TG

internal recording f unction is turned on

Plug in power bank

Lavalier microphone status light function introduction

Type-C OTG cable /

Liyening OTG cable

Bluetooth accompaniment function

1. If the status indicator blinks slowly, the collar microphone is not connected to the Mini sound card.

2. After the is turned on, the blue light is always on, indicating that the power is normal; the red and blue

flashes alternately, indicating that the power is low;

Status light function introduction

A short press of the bluetooth icon button on the remote control,Enable bluetooth accompaniment,If the Bluetooth status indicator bli nks sl owly,

the sound card is not connected yet.

Turn on the bluetooth function of your phone, Search bluetooth device nam ed G63 point connection,When the bluetooth stat us li ght of the sou nd

card is steady on, the connection is successful.

Play m usic from your phone to your so und card.

Sound card status light function introduction

Director mode: switch to this mode, the indicator light is always on, otherwise it is off;

Wired + wireless live broadcast mode: switch to this mode, the indicator light is always on, otherwise it is off;

Director mode: switch to this mode, the indicator light is always on, otherwise it is off;

Computer mode: switch to this mode, the indicator light is always on, otherwise it is off;

Dodge mode: enter this mode, the indicator light is always on, otherwise it is off;

-- According to the connection diagram, use a 3.5mm headphone audio cable to connect the 3.5mm live interface of the host

and the headphone interface of the live mobile phone;

-- Play the music of the mobile phone, which can be transmitted to the wireless headset and the wired headset connected to the host;

Open the live broadcast software or the voice recorder that comes with the mobile phone, and test whether the sound output by the

host can be received by the live broadcast mobile phone.

Live mobile

6. Power indicator: normal power, the blue light is always on; low power, red and blue flash alternately;

plug in the charger, the charging port red light is always on, and the blue light is always on when fully charged.

Headph ones Audio Input Micr ophone Li ve

.06.

.07.

.08.

3.5mm audio live cable

Monitor + Monitor volume increase

Monitor + Monitor volume down

Pro Optional action (Professional sound mode)

Button Function description

WIRELESS Optional action (Bluetooth connection)

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to this unit not expressly approved by the part

sponsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirement.

The device can be used in portable exposure condition without restriction.