Professional PC Audio Interface for USB User Manual www.yellowtec.com info@yellowtec.com made in germany YELLOWTEC is a brandname of THUM+MAHR GMBH Heinrich-Hertz-Strasse 1-3 D-40789 Monheim Tel. ++49 (0) 2173/967-315 Fax ++49 (0) 2173/967-400 www.thummahr.de 12 1 www.yellowtec.
Notice of Warranty The terms and conditions of the Warranty applying to the Product accompanying this Notice of Warranty are found exclusively in the Notice of Warranty. To the extent there is any inconsistency of conflict between the terms and conditions of the Notice of Warranty and the terms and conditions found anywhere else, including the Manual accompanying this Product, the terms and conditions of this Notice of Warranty are superseding and control.
Safety instructions Connection - Before installation or operation of equipment read all safety instructions warnings and operating instructions. - Heed all warnings on the equipment. - Follow the operating instructions. Yellowtec PUC is designed to operate as an Audio Converter at a USB port of your PC. PUC draws its power supply from the PC USB port. External supply is not needed, therefore a power input connector is not provided.
PUC automatically selects the audio source. SUB-D25F If a digital audio signal is present at the digital input, this input will be selected. (Only condition: the input signal must be in a format that PUC identifies as convertable.) Otherwise the analogue inputs are selected. 25 13 Sub-D GPI Standard: S/PDIF Signal Shield Pin 14 Pin 2 Optional: Signal+ SignalShield Pin 14 Pin 2 Pin 15 ZLM BYPASS INT LVL Digital Audio Input AES/EBU The outputs, digital and analogue, are simultaneously active.
Settings using Windows XP BLOCKDIAGRAMM Open "Sounds and Audio Devices Properties" (in the "Control Panels" folder). Select the register card "Volume" and set the control of "Device volume" to "High". AES/EBU AES/EBU DEC ALTERNATIVE OPTION DIGITAL INPUT S/PDIF DEC AUTO SIGNAL SELECT set "Device volume" to "High" (maximum) L ANALOG INPUT ADC R USB DEV.
Settings using Windows 2000 Working with application software Open "Sounds and Multimedia Properties" (in the "Control Panels" folder). Select the register card "Sounds" and set the control of "Sound Volume" to "High". Adapting analogue level standards Depending on its GPI settings PUC can handle maximum levels of +15dBu resp. +18dBu at the analogue inputs and outputs. This is related to the specified reference levels of +6dBu resp.
Settings using Windows 2000 Working with application software Open "Sounds and Multimedia Properties" (in the "Control Panels" folder). Select the register card "Sounds" and set the control of "Sound Volume" to "High". Adapting analogue level standards Depending on its GPI settings PUC can handle maximum levels of +15dBu resp. +18dBu at the analogue inputs and outputs. This is related to the specified reference levels of +6dBu resp.
Settings using Windows XP BLOCKDIAGRAMM Open "Sounds and Audio Devices Properties" (in the "Control Panels" folder). Select the register card "Volume" and set the control of "Device volume" to "High". AES/EBU AES/EBU DEC ALTERNATIVE OPTION DIGITAL INPUT S/PDIF DEC AUTO SIGNAL SELECT set "Device volume" to "High" (maximum) L ANALOG INPUT ADC R USB DEV.
PUC automatically selects the audio source. SUB-D25F If a digital audio signal is present at the digital input, this input will be selected. (Only condition: the input signal must be in a format that PUC identifies as convertable.) Otherwise the analogue inputs are selected. 25 13 Sub-D GPI Standard: S/PDIF Signal Shield Pin 14 Pin 2 Optional: Signal+ SignalShield Pin 14 Pin 2 Pin 15 ZLM BYPASS INT LVL Digital Audio Input AES/EBU The outputs, digital and analogue, are simultaneously active.
Safety instructions Connection - Before installation or operation of equipment read all safety instructions warnings and operating instructions. - Heed all warnings on the equipment. - Follow the operating instructions. Yellowtec PUC is designed to operate as an Audio Converter at a USB port of your PC. PUC draws its power supply from the PC USB port. External supply is not needed, therefore a power input connector is not provided.
Notice of Warranty The terms and conditions of the Warranty applying to the Product accompanying this Notice of Warranty are found exclusively in the Notice of Warranty. To the extent there is any inconsistency of conflict between the terms and conditions of the Notice of Warranty and the terms and conditions found anywhere else, including the Manual accompanying this Product, the terms and conditions of this Notice of Warranty are superseding and control.
Professional PC Audio Interface for USB User Manual www.yellowtec.com info@yellowtec.com made in germany YELLOWTEC is a brandname of THUM+MAHR GMBH Heinrich-Hertz-Strasse 1-3 D-40789 Monheim Tel. ++49 (0) 2173/967-315 Fax ++49 (0) 2173/967-400 www.thummahr.de 12 1 www.yellowtec.
