Technical data

PAGE 43
Talkmaster XT ® Software
Please enter the correct IP address of the system under IP Address and the
correct Port under Port.
RS232
If you want to use the RS232 interface, connect the serial RS232 interface via a
1:1 connecting cable with your PC. Please select now under Interface
→
RS232. Under Parameter → Port the COM Port of your PC, which is con-
nected with the system and under Mode the desired baud rate (standard:
38400 Baud).
FIG. 20 RS232 PARAMETER.
Control Interface List
If you want to manage several units with the PC Software or you want to con-
nect to one system via different control ports, e.g. as PC 1 and PC 2, you can
use the option Control Interface List.
To create a new list entry, press the New button. Please enter the settings for
the LAN or RS232 parameters as described above. Additionally, you can enter
a Name for the list entry. The new entry will be displayed as button in the
main window of the Talkmaster XT
®
Software, e.g. if you create an entry
with the name „PC 1“, the corresponding button will be displayed.
TIP
The currently allocated IP address of the system can be displayed by pressing
the telephone button on the front keypad of the system twice if cur-
rently no Audio connection is established.
NOTE
Instead of the PC you can also connect the optional b-line XT Keypad to the
serial interface of the system (see CHAPTER 6, Page 83).
ATTENTION If you connect your PC via RS232, the LAN interface of b-line XT will be dis-
abled. In this way, you can only connect one PC to the system.
!