Technical data

PAGE 34
Talkmaster XT ® Software
Operation via the Talkmaster XT ® Software
In the following chapters, all functions of the Talkmaster XT
®
Software are
described in detail.
5.3 The Talkmaster XT ® main window
After starting the Talkmaster XT
®
Software, the main window is displayed
automatically (see Fig. 10).
The connection status between PC and system is displayed in the bottom right
corner of the window:
PC ONLINE: Connection is okay
PC OFFLINE: Connection with PC is faulty
Following further status messages are possible:
PC ONLINE ALARM: Upcoming alarm
(see System Monitor, green-dark green blinking)
ISDN REMOTE: A remote connection exists
(red-white blinking)
ISDN REMOTE ALARM: Upcoming alarm in remote
system (blue-dark blue blinking).
NOTE
If the connection is faulty, please check the following points:
– External power supply of the system is plugged in (display available)
– LAN or serial 1:1 cable is connected with PC and system
– Correct IP Address and Port are selected (if LAN interface is used)
– COM port and correct baud rate are selected in the software (if RS232 in-
terface is used)