Technical data

PAGE 29
Operation via Display and Keypad
4.2.3 Dropping a connection
The connection can be dropped by pressing the telephone receiver button
. If no other connection exists, the main menu is displayed after a few
seconds.
4.2.4 Accepting a call
If the b-line XT receives a call, the status window automatically displays the
Callin signal.
The call is accepted directly via the telephone receiver button . The caller
signal is displayed on the selected Audio line, which can be set via the
Line
softkey.
The call is rejected by pressing the telephone receiver button .
4.2.5 Two connections
In both operating mode two separate telephone hybrids are available, which
means you can establish two connections with different subscribers simulta-
neously.
To switch to the second channel please press the
Shift key ( # ). The selected
channel is displayed via an inverted display of the telephone number respec-
tively the name. All further steps for operation are identical with the opera-
tion when there is only one caller. The channel can be switched anytime.
4.3 Comfort functions
4.3.1 Redialling
You reach the redialling function by pressing again the telephone receiver
button for the line on which currently no connection is established. In the
list the subscribers recently called are displayed. In the input field
Search you
can search for a certain subscriber or select a subscriber from the list via the
cursor keys and
.
For selecting the subscriber, please press again the telephone receiver button
.
NOTE
If you want to drop a connection, please be sure that you select the right chan-
nel.
NOTE
To enter characters, please use the alphanumeric keypad. The desired char-
acter can be reached by pressing the respective key several times. For in-
stance, to enter ’
K ’ you must press the’ 5 ’ key twice. Misentries can be cor-
rected via the
Delete softkey.
To switch between upper and lower case press the
SHIFT key. The display
changes from
ABC to abc.