User Guide

CHAPTER 6
Mapping
84
NOTE: If your editing mainly affects an entire Layer patch you do not need to create individual
Sections from Zones of this Layer. Sections are essential if you want to edit basic, logic
groups of Zones of a Layer patch separately from other Zones.
To create a new Section please select one or multiple Zones with the pressed shift key and your
mouse. When finished click the „select“ pull-down menu and select „create new section“. Now enter
an arbitrary name for your new Section and press the return key.
TIP : Always use well-defined names for your Sections! This makes the management of your
Sections much easier.
If you select multiple Zones and you want to create a separate Section for each selected Zone, you
can use the option „Create Section for each selected Zone“ in the „select“ pull-down menu. This will
create a new Zone for each of the selected Zones an name them automatically.
All other pull-down menu parameters which affect Zones or Sections - like Delete, Move to Section,
etc - are self-explanatory.
Edit Preferences Menu
„show audio file name“:
Shows next to the Section name also the name of the audio file above the Mapping Editor.
„auto move root key“:
Enables to move one or multiple Zones without Root Key so the basic tune will not get changed.
„show playing zone“:
Shows the entire Zone that gets played.
„show note on velocity“:
Shows ALL played notes incl. their velocity in the Mapping Editor with a thin blue line.
„show unloaded zones“:
Shows all Zones which are currently not loaded into the RAM if the „Auto-Ram-Cleaner“ option is
activated. This feature will show all these Zones in red color.