User Guide

yellow tools INDEPENDENCE 1.0
Manual
59
Sections or Alternates without having to save your changes before. To copy your current settings
click on the „presets“ pull-down menu and select the „copy“ option. Now select your Layer, Section
or Alternate you want to transfer these settings, click on the „presets“ pull-down menu again and
select the „paste“ option afterwards. You will notice that ALL parameter settings of the current
VOL. AHDSR have changed to the values of your prior curve.
To deactivate the „VOL. AHDSR“ please use the „bypass“ button in the upper right corner.
IMPORTANT: Like the filter section also the „VOL. AHDSR“ curve can be used with
„absolute“ or „relative“ settings. Please refer to the explanations in the
filter section.
TIP: You can also use Independence’s Flexible Modifiers to assign full-dynamic modification to
your Filter, Volume AHDSR and Skip settings.