User Guide

CHAPTER 5
Modules
58
Use the „v.“ (vertical) and „h.“ (horizontal) zoom options to customize the view of the curve. Beside
these input fields you can also frame the part of the curve you want to zoom in with your mouse.
To move an already horizontally zoomed-in view, press and hold the „shift“ key, click with the
mouse on the curve and drag it to the left or to the right. Click the „fit“ button to return to the
general view.
IMPORTANT: Independence‘s Volume AHDSR allows even positive volume values amounting
to additional 12dB for the „Hold Level“ and „Sustain Level“ parameters.
Please use these settings very carefully since this can possibly cause unwanted
overmodulation of your Layers, Sections or Alternates! Positive volume values
get displayed in red immediately.
You can save all your parameter settings as individual preset or also assign them by „copy & paste“
to other Layers, Sections or Alternates.
To save your settings click on the „presets“ pull-down menu and the select the „save as“ option. A
dialog will show up where you can enter your desired name for your preset.
If you click on the „presets“ pull-down menu next time, your preset will show up in the list.
Beside the „save as“ option you can also assign your current VOL. AHDSR settings to other Layers,