User Guide

CHAPTER 5
Modules
54
The left part below the basic parameters of the Module Editor contains the Layer internal key
switch, the playing direction feature, the filter section and the „skip“ feature.
Layer internal key switch
Beside the main key switch function in the Layer Set Area Independence also offers an additional
Layer internal key switch that enables you to switch even between your Sections and Alternates of
a Layer immediately - without affecting the main key switch of the Layer! This way you can switch
between multiple e-bass Layers with the Layer key switch, for example, and simultaneously switch
inside the Layer between the different playing techniques, like long notes, vibrato notes, tappings,
8th notes, slides, etc. - provided that these playing techniques exist as individual Sections/Alternates.
To create an internal key switch select one or multiple Sections or Alternates in the „select“ pull-
down menu or the Content Browser. Assign the desired key switch note to your selection afterwards.
Next to the standard selection of a note that assigns a key switch we also included a “learn” function
that helps for an easier assignment of the key switch note. Click on the key switch pull-down menu
and the following list shows up:
Select the “learn” option and press the desired note on your keyboard (or other MIDI controller)
afterwards. Now this note is your key switch note for the selected Layer and it is also shown in the
key switch display accordingly.
Use the „bypass“ button to deactivate the key switch function temporarily.