User Guide

CHAPTER 4
User Interface & Basics
46
Use the Output pull-down menu to assign if the selected Layer gets displayed as MONO, STEREO
or SURROUND (incl. all surround formats) channel in the Independence Mixer. The output
channels get assigned in the Mixer area. For the support of Surround Channels, the „Independence
Pro Surround Extension“ is required.
MIDI Basics Settings
In the MIDI input pull-down menu you can assign the MIDI input channel for the selected Layer.
Use the “PC” (Program Change) button to activate/deactivate the program change feature.
The transpose parameter accepts values from -60 semitones to +60 semitones to adjust the Layer
position to your keyboard. Hold via controller assigns on which controller number your keyboard
should react to the pressed sustain pedal. You can manage up to 127 different and freely assignable
MIDI controllers for each Layer. The default value is set to #64.
MIDI Extended Settings