User Guide

yellow tools INDEPENDENCE 1.0
Manual
149
Origami LE Positioner
When you click on the “positioner” button in the upper right corner, the display will switch to the
positioner screen and the button changes into “back”. If the Positioner is not yet activated, simply
click on the orange button inside the 3D panel to activate Origami’s positioner and to move your
instruments inside the virtual room.
As soon as activated, a “speaker” icon comes up in the middle of the 3D matrix and the status of the
button switches into “active”.
Now you can change the position of the audio signal in your virtual room. To return to the original
position of the audio signal in the center, please press and hold the “Alt” key and click on the icon.
Now the room position will be reset to its default values.